Synergistic effect of multi walled carbon nanotubes and reduced graphene oxides in natural rubber for sensing application

Utilizing the electrical properties of polymer nanocomposites is an important strategy to develop high performance solvent sensors. Here we report the synergistic effect of multi walled carbon nanotubes (MWCNTs) and reduced graphene oxide (RGO) in regulating the sensitivity of the naturally occurring elastomer, natural rubber (NR). Composites were fabricated by dispersing CNTs alone and together with exfoliated RGO sheets (thermally reduced at temperatures of 200 and 600 °C) in NR by a solution blending method. RGO exfoliation and the uniform distribution of fillers in the composites were studied by atomic force microscopy, Fourier transformation infrared spectroscopy, X-ray diffraction, transmission electron microscopy and Raman spectroscopy. The solvent sensitivity of the composite samples was noted from the sudden variation in electrical conductivity which was due to the breakdown of the filler networks during swelling in different solvents. It was found that the synergy between CNTs and RGO exfoliated at 200 °C imparts maximum sensitivity to NR in recognizing the usually used aromatic laboratory solvents. Mechanical and dynamic mechanical studies reveal efficient filler reinforcement, depending strongly on the nature of filler-elastomer interactions and supports the sensing mechanism. Such interactions were quantitatively determined using the Maier and Göritz model from Payne effect experiments. It is concluded that the polarity induced by RGO addition reduces the interactions between CNTs and ultimately results in the solvent sensitivity. © 2013 The Royal Society of Chemistry.

Highly sensitive SnO2 nanofiber chemiresistors with a low optimal operating temperature: synergistic effect of Cu2+/Au co-doping

Metal oxide chemiresistors (MOCs) with a low optimal operating temperature, high sensitivity and fast response/recovery are highly promising for various applications, but remain challenging to realize. Herein, we demonstrate that SnO2 nanofibers after being co-doped with Cu2+ and Au show considerably enhanced sensing performances at an unexpectedly decreased operating temperature. A synergistic effect occurs when the two dopants are introduced together. Co-doping may form a novel strategy to the development of ultrasensitive MOCs working at a low optimal temperature. This journal is © the Partner Organisations 2014.

Molecular interactions behind the synergistic effect in mixed monolayers of 1-octadecanol and ethylene glycol monooctadecyl ether

Mixed monolayers of 1-octadecanol (C18OH) and ethylene glycol monooctadecyl ether (C18E1) were studied to assess their evaporation suppressing performance. An unexpected increase in performance and stability was found around the 0.5:0.5 bicomponent mixture and has been ascribed to a synergistic effect of the monolayers. Molecular dynamics simulations have attributed this to an additional hydrogen bonding interaction between the monolayer and water, due to the exposed ether oxygen of C18E1 in the mixed system compared to the same ether oxygen in the pure C18E1 system. This interaction is maximized around the 0.5:0.5 ratio due to the particular interfacial geometry associated with this mixture.

Use of in vitro critical inhibitory concentration, a novel approach to predict in vivo synergistic bactericidal effect of combined amikacin and piperacillin against pseudomonas aeruginosa in a systemic rat infection model

PURPOSE: This study was undertaken to explore the use of in vitro critical inhibitory concentration (CIC) as a surrogate marker relating the pharmacokinetic (PK) parameters to in vivo bactericidal synergistic effect [pharmacodynamic (PD)] of amikacin + piperacillin combination against Pseudomonas aeruginosa in a systemic rat infection model. METHODS: The in vitro antibacterial activities of amikacin and piperacillin, alone and in combinations at various ratios of the concentrations, were tested against a standard [5 x 10(5) colony-forming units (CFU)/ml] and a large (1.5 x 10(8) CFU/ml) inoculum of P. aeruginosa ATCC 9027 using a modified survival-time method. The CIC of each individual antibiotic for the different combinations was determined using a cup-plate method. In vivo studies were performed on Sprague-Dawley rats using a systemic model of infection with P. aeruginosa ATCC 9027. PK profiles and in vivo killing effects of the combination at different dosing ratios were studied. RESULTS: An inoculum effect was observed with the antibiotics studied. Synergy was seen against both the inocula at the following concentration ratios: 70% C(ami) + 30% C(pip) and 75% C(ami) + 25% C(pip), where C(ami) and C(pip) are the concentrations of amikacin and piperacillin to produce a 1000-fold decrease in bacterial population over 5 h, respectively. The CIC values determined corroborated with the order of in vitro bacterial killing observed for the antibiotic combinations. The dosing ratio of 12.6 mg/kg amikacin + 36 mg/kg piperacillin (a 70:30 ratio of the individual doses) exhibited the greatest killing in vivo when compared to the other ratios. The PK-PD relationships were described by simple, linear regression equations using the area under the in vivo killing curve as a PD marker and the AUCIC(ami)/CIC(ami) + AUCIC(pip)/CIC(pip), AUC(ami)/CIC(ami) + AUC(pip)/CIC(pip), C(max,ami)/CIC(ami) + C(max,pip)/CIC(pip), and AUCIC(ami)/MIC(ami) + AUCIC(pip)/MIC(pip) as PK markers for the amikacin + piperacillin combination. CONCLUSION: The combination of amikacin and piperacillin exhibited synergistic killing effect on P. aeruginosa that could be modeled using CIC as a surrogate marker relating the PK parameters to in vivo bactericidal effect.

Synergistic antiproliferative action of the Flavonols Quercetin and Kaempferol in cultured human cancer cell lines

The consumption of vegetables containing the flavonols quercetin and kaempferol reduces the risk of cancer. We utilized human gut (HuTu-80 and Caco-2) and breast cancer cells (PMC42) to show the synergistic effect of quercetin and kaempferol in reducing cell proliferation. A trend in reduction of total cell counts was seen following a single exposure, a 4-day exposure or a 14-day exposure to quercetin and kaempferol. Combined treatments with quercetin and kaempferol were more effective than the additive effects of each flavonol. The reduction in cell proliferation was associated with decreased expression of nuclear proliferation antigen Ki67 and decreased total protein levels in treated cells relative to controls. In conclusion, the synergistic antiproliferative effect of quercetin and kaempferol demonstrated in cultured human cells has broad implications for understanding the influence of dietary nutrients in vivo, where anticancer effects may be a result of nutrients which act in concert.

The additive effect of zwitterion and nano-particles on ion dissociation in polyelectrolytes

To realise the battery potential of gel polyelectrolytes greater ion dissociation, ultimately leading to higher conductivities, must be achieved. Higher conductivities will result through increasing the ion-dissociating properties of the gel polyelectrolyte. The poor degree of ion dissociation arises as the active ion tends to remain in close proximity to the backbone charge. Nano-particle inorganic oxides, and zwitterionic compounds have been shown to act as dissociation enhancers in certain polyelectrolyte systems. In an attempt to further increase ion dissociation the addition of both TiO₂ nano-particles and a zwitterionic compound based on 1-butylimidazolium-3-N-(butanesulphonate) were added to the gel polyelectrolyte system poly (Li-2-acrylamido-2-methyl-1-propane sulphonate-co-N,N′-dimethylacrylamide), poly(Li-AMPS-co-DMAA) to determine if a synergistic effect occurs. Two different solvents were used to determine the breadth of applicability of the additive effect. The use of both dissociators resulted in the maximum ionic conductivity being achieved at lower nano-particle concentrations when compared to an identical system without zwitterion.

The effect of alternate heating rates during cure on the structure-property relationships of epoxy/MMT clay nanocomposites

This paper investigates the effect of both the mixing technique and heating rate during cure on the dispersion of montmorillonite (MMT) clay in an epoxy resin. The combination of sonication and using a 10. °C/min heating rate during cure was found to facilitate the dispersion of nanoclay in epoxy resin. These processing conditions provided a synergistic effect, making it possible for polymer chains to penetrate in-between clay galleries and detach platelets from their agglomerates. As the degree of dispersion was enhanced, the flexural modulus and strength properties were found to decrease by 15% and 40%, respectively. This is thought to be due to individual platelets fracturing in the nanocomposite. Complementary techniques including X-ray diffraction (XRD), small angle X-ray scattering (SAXS), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM) and optical microscopy were essential to fully characterise localised and spatial regions of the clay morphologies.

Synergistic effects of sodium lauroyl sarcosinate and glutamic acid in inhibition assembly against copper corrosion in acidic solution

© 2015 Elsevier B.V. All rights reserved. A self-assembled multilayer (SAM) from sodium lauroyl sarcosinate (SLS) and glutamic acid (GLU) is formed on copper surface. Its inhibition ability against copper corrosion is examined by electrochemical analysis and weight loss test. In comparison to SAM formed by just SLS or GLU, a synergistic effect is observed when the coexistence of SLS and GLU in SAM. The SLS/GLU SAM has an acicular multilayer structure, and SAM prepared under the condition of 5 mM SLS and 1 mM GLU shows the best protection efficiency. PM6 calculation reveals that the synergistic effect stems from interactions between SLS, GLU and cupric ions.

Synergistic coassembly of two structurally different molecular gelators

Coassembly of molecules can produce materials with improved properties and functionalities. To this end, achieving a molecular level understanding of the interactions governing the coassembly is essential. In this work, two molecular gelators with significantly different structures and main intermolecular forces for assembly were coassembled. The elastic moduli of the hybrid gels are more than 1 order of magnitude higher than those of the gels formed by the individual gelators, showing an obvious synergistic effect. The interactions between the gelators were investigated with confocal microscopy and both one-dimensional and two-dimensional nuclear magnetic resonance. It was found that the two gelators coassemble to form fibers due to the nonspecific van der Waals interactions between their alkyl chains and the specific interactions between their functional groups. Switching from one gelator-dominated fiber network to the other gelator-dominated fiber network was achieved at a critical molar ratio of the gelators. The two gelators serve as additives of each other to tune the nucleation and growth of the fiber networks. The observations of this work are significant to the development of materials with improved properties by coassembly of different molecules.

The emitting species formed by the oxidation of hydrazides with hypohalites or N-halosuccinimides

The chemiluminescence accompanying the oxidation of salicylic hydrazide (2-hydroxybenzoic acid hydrazide) with hypochlorite, hypobromite, N-chlorosuccinimide, N-bromosuccinimide or hydrogen peroxide with cobalt(II) matched the photoluminescence emission of salicylic acid. In a related reaction, the oxidation of a mixture of isoniazid and ammonia, a synergistic effect was observed. The chemiluminescence spectrum for this reaction matches that accompanying the oxidation of the hydrazide, rather than the oxidation of ammonia. These results were used to assess mechanisms proposed by previous authors.

Removal of VOCs by photocatalysis process using adsorption enhanced TiO2–SiO2 catalyst

Volatile organic compounds (VOCs) exist widely in both the indoor and outdoor environment. The main contributing sources of VOCs are motor vehicle exhaust and solvent utilization. Some VOCs are toxic and carcinogenic to human health, such as benzene. In this study, TiO₂–SiO₂ based photocatalysts were synthesized using the sol–gel method, with high surface areas of 274.1–421.1 m²/g obtained. Two types of pellets were used as catalysts in a fixed-bed reactor installed with a UV black light lamp. Experiments were conducted to compare their efficiencies in degrading the VOCs. Toluene was used as the VOC indicator. When the toluene laden gas stream passed through the photocatalytic reactor, the removal efficiencies were determined using a FTIR multi-gas analyser, which was connected to the outlet of the reactor to analyse the toluene concentrations. As the TiO₂–SiO₂ pellets used have a high adsorption capacity, they had dual functions as a photocatalyst and adsorbent in the hybrid photocatalysis and adsorption system. The experiments demonstrated that the porous photocatalyst with very high adsorptive capacity enhanced the subsequent photocatalysis reactions and lead to a positive synergistic effect. The catalyst can be self-regenerated by photocatalytic oxidation of the adsorbed VOCs. When the UV irradiation and feeding gas is continuous, a destruction efficiency of about 25% was achieved over a period of 20 h. Once the system was designed and operated into adsorption/regeneration mode, a higher removal efficiency of about 55% was maintained. It was found that the catalyst pellets with a higher surface area (421 m²/g) achieved higher conversion efficiency (100%) for a longer period than those with a lower surface area. A full spectrum scan was carried out using a Bio-rad Infrared spectrometer, finding that the main components of the treated gas stream leaving the reactor, along with untreated toluene, were CO₂ and water. The suspected intermediates of aliphatic hydrocarbons and CO were found in minimal amounts or were non detectable. The kinetic rate constants were calculated from the experimental results, it appeared that the stronger adsorption capacity, i.e. larger specific surface area, the higher conversion efficiency would be achieved.

The use of ultrasonic cleaning for ultrafiltration membranes in the dairy industry

The ultrafiltration of whey solutions is a common feature of dairy processes. However, the frequent fouling of ultrafiltration membranes and the subsequent cleaning cycle significantly affect the economics of such a process. In this work, we investigated the effect of ultrasonics on the cleaning of whey-fouled membranes and examined the variables that influence this effect. Experiments were conducted using a small single sheet membrane unit that was immersed totally within an ultrasonic bath.

Results show that the use of ultrasonics enhances the flux recovery following fouling. The extent of flux recovery is independent of the length of sonication time and increases with ultrasonic power. The use of surfactants in combination with ultrasonic irradiation shows a synergistic effect, providing a better efficiency than either cleaning process alone. Repetitive use of ultrasonic cleaning over a 1 month period does not result in any significant change in the permeate flux of a cleaned membrane, indicating that the ultrasonic treatment does not appear to damage the membrane structure itself.

Independent and combined effects of exercise and vitamin D on muscle morphology, function and falls in the elderly

Regular exercise, particularly progressive resistance training (PRT), is recognized as one of the most effective strategies to prevent age-related muscle loss (sarcopenia), but its effects on muscle function are mixed. However, emerging data indicates that high velocity PRT (fast concentric muscle contractions) is more effective for improving functional outcomes than traditional PRT. In terms of falls prevention, high-challenging balance training programs appear to be most effective. There is also compelling evidence that supplemental vitamin D is an effective therapeutic option for falls prevention. The findings from a recent meta-analysis revealed that supplemental vitamin D at a dose of at least 700–1,000 IU/d or an achieved serum 25(OH)D level of at least 60 nmol/L was associated with reduced falls risk among older individuals. Based on these findings, it is possible that the combination of exercise and vitamin D could have a synergistic effect on muscle morphology and function, particularly since both interventions have been shown to have beneficial effects on type II “fast twitch” muscle fibers and systemic inflammation, which have both been linked to losses in muscle mass and function. Unfortunately however, the findings from the limited number of factorial 2 × 2 design RCTs indicate that additional vitamin D does not enhance the effects of exercise on measures of muscle morphology, function or falls risk. However, none of these trials were adequately powered to detect a “synergistic” effect between the two treatment strategies, but it is likely that if an exercise-by-vitamin D interaction does exist, it may be limited to situations when vitamin D deficiency/insufficiency is corrected. Further targeted research in “high risk” groups is still needed to address this question, and evaluate whether there is a threshold level of serum 25(OH)D to maximize the effects of exercise on muscle and falls risk.

Novel carbon materials for thermal energy harvesting

To decrease the consumption of fossil fuels, research has been done on utilizing low grade heat, sourced from industrial waste streams. One promising thermoenergy conversion system is a thermogalvanic cell; it consists of two identical electrodes held at different temperatures that are placed in contact with a redox-based electrolyte [1, 2]. The temperature dependence of the direction of redox reactions allows power to be extracted from the cell [3, 4]. This study aims to increase the power conversion efficiency and reduce the cost of thermogalvanic cells by optimizing the electrolyte and utilizing a carbon based electromaterial, reduced graphene oxide, as electrodes. Thermal conductivity measurements of the K3Fe(CN)6/K4Fe(CN)6 solutions used, indicate that the thermal conductivity decreases from 0.591 to 0.547 W/m K as the concentration is increased from 0.1 to 0.4 M. The lower thermal conductivity allowed a larger temperature gradient to be maintained in the cell. Increasing the electrolyte concentration also resulted in higher power densities, brought about by a decrease in the ohmic overpotential of the cell, which allowed higher values of short circuit current to be generated. The concentration of 0.4 MK3Fe(CN)6/K4Fe(CN)6 is optimal for thermal harvesting applications using R-GO electrodes due to the synergistic effect of the reduction in thermal flux across the cell and the enhancement of power output, on the overall power conversion efficiency. The maximum mass power density obtained using R-GO electrodes was 25.51 W/kg (three orders of magnitude higher than platinum) at a temperature difference of 60 _C and a K3Fe(CN)6/K4Fe(CN)6 concentration of 0.4 M.

Sulfur-doped porous reduced graphene oxide hollow nanosphere frameworks as metal-free electrocatalysts for oxygen reduction reaction and as supercapacitor electrode materials.

Chemical doping with foreign atoms is an effective approach to significantly enhance the electrochemical performance of the carbon materials. Herein, sulfur-doped three-dimensional (3D) porous reduced graphene oxide (RGO) hollow nanosphere frameworks (S-PGHS) are fabricated by directly annealing graphene oxide (GO)-encapsulated amino-modified SiO2 nanoparticles with dibenzyl disulfide (DBDS), followed by hydrofluoric acid etching. The XPS and Raman spectra confirmed that sulfur atoms were successfully introduced into the PGHS framework via covalent bonds. The as-prepared S-PGHS has been demonstrated to be an efficient metal-free electrocatalyst for oxygen reduction reaction (ORR) with the activity comparable to that of commercial Pt/C (40%) and much better methanol tolerance and durability, and to be a supercapacitor electrode material with a high specific capacitance of 343 F g(-1), good rate capability and excellent cycling stability in aqueous electrolytes. The impressive performance for ORR and supercapacitors is believed to be due to the synergistic effect caused by sulfur-doping enhancing the electrochemical activity and 3D porous hollow nanosphere framework structures facilitating ion diffusion and electronic transfer.